Skip to main content
Polymers

Polymers

Solar-powered water purifier is inspired by pufferfish

19 Apr 2021
Photo of the water purifier in a lake
Pristine water: the solar absorber gel purification system in a lake at Princeton University (left) and the clean water produced during its immersion. (Courtesy: Xiaohui Xu)

Pufferfish have inspired a new device that is capable of the highest rate ever of passive solar water purification – according to its creators Xiaohui Xu and colleagues at Princeton University in the US. Based on an advanced hydrogel, the system can rapidly soak up and filter water when cool, and then release clean water when warmed in the Sun. The team hopes their innovation could lead to low-cost and sustainable off-grid purification systems, potentially improving access to clean water for many communities worldwide.

According to the United Nations, one in three people worldwide do not have access to safe drinking water. Therefore, there is a pressing need for inexpensive, environmentally sustainable systems for filtering water. These are best achieved through passive purification technologies, which use solar energy to separate water from contaminants such as heavy metals, oils, and harmful microbes. Today, this is widely done by evaporating water, and condensing it onto a surface – but this is an energy intensive process, leading to slow production rates.

Xu’s team has taken a more advanced approach based on the behaviour of pufferfish. When these fish detect predators, they rapidly absorb water to swell their bodies, making themselves appear more threatening. Once danger passes, the water is quickly released. To mimic this behaviour, the researchers developed a sponge-like device they dubbed a solar absorber gel (SAG), containing three key components.

PNIPA polymer chains

At the centre of the material is an advanced hydrogel, composed of a temperature-sensitive mesh of PNIPA polymer chains, containing both hydrophobic and hydrophilic regions. At lower temperatures, these chains remain long and flexible. This enables water to flow into the mesh through capillary action, and bond with its hydrophilic regions. At temperatures higher than 33 °C, the PNIPA chains undergo a phase transition, becoming short and rigid. As a result, the mesh loses around 90% of its volume and it becomes hydrophobic – pushing water out of the material.

Surrounding this inner hydrogel is a dark layer of polydopamine, which efficiently converts sunlight into heat: enabling the PNIPA to reach its phase transition temperature in cooler conditions, while also filtering out heavy metals and organic molecules before they entered the hydrogel. Finally, an outer alginate layer filtered out any microbes, along with any other larger molecules.

Xu’s team tested the SAG’s performance by placing it in a lake on the Princeton campus with a water temperature of 25 °C. After soaking the material, they warmed it in sunlight to release its absorbed water. Over a 2 h cycle of soaking and discharge, the material demonstrated the highest rate of passive solar water purification ever reported. The SAG was also highly durable; barely diminishing in performance even after 10 collection cycles.

Owing to their simple, water-based manufacturing process, SAG materials are low-cost and non-toxic, ensuring both their accessibility and sustainability for off-grid water purification. Xu and colleagues believe their material could be transformative: potentially improving quality of life for many communities around the world, especially where access to electricity is limited.

The research is described in Advanced Materials.

Copyright © 2024 by IOP Publishing Ltd and individual contributors